EasyManua.ls Logo

Hacker Motor PowerFuel RX V2 - User Manual

Hacker Motor PowerFuel RX V2
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PowerFuel RX V2 Spritpumpe
PowerFuel RX V2 fuel pump
Kurzanleitung
Quick reference guide
Hacker Motor GmbH
Schinderstrassl 32
D 84030 Ergolding
Website website: www.hacker-motor.com
Anleitungen manuals: wiki.hacker-motor.com
Question and Answer IconNeed help?

Do you have a question about the Hacker Motor PowerFuel RX V2 and is the answer not in the manual?

Summary

Product Description and Mounting

Product Description

Fuel pump with integrated self exhausting passive check valve and enhanced pump motor.

Mounting

Attaching the pump using supplied clamps, securing with cable tie or O-ring for aerobatic planes.

Connection Suction Line

Keep suction line short, minimum 2.5mm diameter, use fuel-resistant hose.

Electrical Connection

Connect to 'BAT' terminal, use dual power supply or separate battery (2500mAh 2S LiPo recommended).

Receiver Connection and Operation

Connection to Receiver

Connect PowerFuel RX to a switchable receiver channel, not ignition channel.

Programming

No programming required before first use; programming jumper is for internal purposes only.

Initial Start-up

Connect to battery and receiver; regulate pump rate via servo position (30%-60%).

Specifications and Settings

Predefined Values

Default programmed values: 1.1ms (-100%) for off, 1.9ms (+100%) for max flow.

Technical Data

Operating voltage, servo signal input, pulse length, temperature range, dimensions, and weight.

Hacker Motor PowerFuel RX V2 Specifications

General IconGeneral
BrandHacker Motor
ModelPowerFuel RX V2
CategoryWater Pump
LanguageEnglish