Once activated, the system will remain in the self leveling mode until either the “SET” pushbutton is
depressed a second time or the vehicle parking brake is released.
Note: The following illustration summarizes the “level find” and “self leveling” operation with relation
to the respective user interface pushbuttons and indicators.
Press once to activate the SLS
System and initiate the
“Level Find Mode”
Press once again to turn the
“Self-Leveling” off.
Level Indicator Light
“Y” or Long Axis
Solid Green – RV is near level
Flashing Green – Adjustment
is possible and within range.
Flashing Amber – Marginal
conditions - possible self-level
Solid Amber – Excessive slope
– Self leveling may not be
possible
Press once to activate the “Self-
Leveling” process.
Press once again to switch the
self leveling “off”.
Note: Parking brake must be
applied for “self-leveling”
adjustments to occur.
Level Indicator Light
“X” or Short Axis
Solid Green – RV is near level
Flashing Green – Adjustment
is possible and within range.
Flashing Amber – Marginal
conditions - possible self-level
Solid Amber – Excessive slope
– Self leveling may not be
possible
Indicator flashes as system levels
the coach. The indicator stays
“on” after leveling is done
To Next Page
Loading...