Warning!
This system is designed to operate with hazardous voltages.
It is imperative that this manual is read and understood before attempting to operate the DDX-9101
Partial Discharge Detector.
Only persons who are duly authorised to do so, and who have been correctly trained in the safe
operation of High Voltage systems must operate this equipment.
It is the responsibility of the customer to ensure that the system is installed and operated in a manner
that meets all relevant safety legislation, standards of good practice, insurance or other codes,
company regulations and any other limitations pertaining to the installation and operation of high
voltage systems.
Warning!
Under transient and or flashover conditions, or where the equipment is operated close to a source of
RF interference the PD Calibration of the system may be rendered invalid. It is the responsibility of
the user to ensure the unit is correctly calibrated immediately prior to making any measurement and
to ensure that after any disturbance to the system, the PD measurement system is recalibrated
Important
Unauthorised opening of the unit may damage the EMI protection of the system and will reduce its
resistance to interference and transients. It may also cause the individual unit to be no longer
compliant with the relevant EMC emission and susceptibility requirements.
This equipment contains exposed terminals carrying hazardous voltages. There are no user
serviceable components in the unit. All repairs and upgrades that require the unit to be opened must
be referred to Hubbell High Voltage Test or one of their nominated agents
In all correspondence, please quote the exact type number of the instrument, the serial number of
the instrument and the version of software that is currently installed on it. The software version can
be found on the configuration screen.
Note
Hubbell High Voltage Test has a policy of continuing improvement on all their products. The design of this
instrument will be subject to review and modification over its life. There may be small discrepancies
between the manual and the operation of the instrument, particularly where software has been upgraded
in the field. Although all efforts are made to ensure that there are no errors in the manuals, Hubbell High
Voltage Test accepts no responsibility for the accuracy of this manual.
Hubbell High Voltage Test accepts no responsibility for damage or loss that may result from errors within
this manual. We retain the right to modify the functionality, specification or operation of the instrument
without prior notice.
All rights reserved. No section of this manual may be reproduced in any form, mechanical or electronic
without the prior written permission of Hubbell High Voltage Test.
To Next Page