EasyManua.ls Logo

HAFA Moon - Wet Zone Installation Requirements; Screw Fastening in Wet Zones

Default Icon
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 ( 16 ) 16 ( 16 )
Garanti/Warranty.
Service, resevdelar/spare-parts
Sweden: Tel: +46 (0)35 15 44 75
Norway: Tel: +47 69 31 02 30
Finland: Puh: 0207 43 50 00
www.hafa.se
www.hafa.dk
www.hafabad.no
www.hafa.se
www.hafabathroom.ru
www.hafa.eu
E-mail:
service@hafa.se
service@hafabad.no
Alla skruvinfästningar i våtzon 1 ska ske i massiv konstruktion såsom betong, reglar, särskild konstruktions-
detalj eller i Våtrumsvägg 2012. Skruvinfästningar i våtzon 1 får inte göras enbart i golv- eller väggskiva.
Krav på tätning gäller både i våtzon 1 och 2. Material för tätning ska fästa mot underlaget och vara
vattenbeständigt, mögelresistent och åldersbeständigt.
Below are Swedish recommendations:
All screws in wet zone 1 must be fixed to solid structures, such as concrete, studs or special structural
components. Screws in wet zone 1 must not be fixed to flooring or wall sheets alone. Requirements for
sealing apply in wet zones 1 and 2. Sealing materials must be fixed to the underlying layer and must be
waterproof, mould-resistant and age-resistant.
SILICONE
SILICONE
SILICONE

Related product manuals