Need help?Do you have a question about the Hafco BM-70VE and is the answer not in the manual?
General| Brand | Hafco |
|---|---|
| Model | BM-70VE |
| Category | Power Tool |
| Language | English |
Procedures for safely removing protective crating and checking for transit damage.
Verifying items against the packing list and cleaning rust preventatives.
Guidelines for placing the machine on a stable and level foundation.
Using wedges for leveling and adjusting the vertical head to its operating position.
Guidance on handle installation, lubrication, and factory inspection details.
Method for setting the head perfectly square with the table using indicators.
Diagram illustrating key lubrication points like grease dialy and oil lead screws.
Procedures for tilting the head and adjusting the overarm position.
Instructions for indexing the turret and tightening all clamping points.
Identifies causes and remedies for chatter and vibration during cutting operations.
Addresses boring/milling alignment and center distance holding issues.
Checklist for inspecting spindle, ways, belts, and head squareness.
General speed guidelines and a detailed table for cutting speeds and feeds.
Procedures for adjusting table, saddle, and knee gibs for smooth movement.
Clamping the saddle for rigidity and steps to remove the table.
Guidance on safely transporting and installing the variable speed head.
Covers lubrication, work limits, clutch usage, and high-speed operation advice.
Diagram showing the layout of the central lubricating oil-feeding equipment.
Description of the control panel components and their operational functions.
Detailed electrical diagrams illustrating the machine's wiring and control circuits.
Identifies hazards associated with the machine and provides recommended risk control strategies.
To Next Page
