PLINTH HOLDER
> Area of application:
> Material:
> Installation:
For fixing the plinth panel.
Plastic
For plug fitting into mounting
plates.
Plinth Height = H: 5 to 10 mm
Plastic
ADJUSTING TOOL
> Area of application:
> Material:
> Adjustment facility:
> Version:
For ergonomic and time-saving
height adjustment of AXILO
TM
plinth adjusting legs.
Plastic, mechanism: Steel
Adjustment angle height 0-10˚
Chuck 6.35 mm (bit supplied)
Adjusting tool handle end and
extension with 6.35 mm chuck.
Height adjustment by rotating by hand or with electric tool to save time.
COMPONENTS
Packing: 20 pieces
Suitable for Cat. No.
16 mm panel 637.47.491
19 mm panel 637.47.490
PLINTH PANEL CLIPS
> Material:
For screw fixing
For press fitting
Note:
> For use from installation height H = 80 mm.
Packing: 25 pieces
Installation Cat. No.
For screw fixing 637.38.054
For press fitting 637.38.063
Packing: 1 piece
Version Cat. No.
Adjusting tool 637.76.360
Extension 637.76.361
EXTENSION
To Next Page
Loading...