Need help?Do you have a question about the Häfele Suzie-Q 541.35.520 and is the answer not in the manual?
General| Brand | Häfele |
|---|---|
| Model | Suzie-Q 541.35.520 |
| Category | Household Hardware |
| Language | English |
Drill side walls with 5mm bit 12mm deep for frameless cabinets with top mounting bracket.
Drill cabinet top with 10mm hole according to illustration for cabinets with a top.
Press cam plate into cabinet bottom holes and fasten with four 3.5 x 30 mm screws.
Place pole with upper bearing into cam plate, turn left until axle clicks into position.
Connect upper pole bearing to top mounting bracket or cabinet top and fasten with screws.
Drill 4 holes into doors according to illustration in fitting instructions.
Screw lower door brackets first, then upper door brackets (left and right) onto doors.
Hang doors onto upper and lower door holders using the locating pins.
Attach securing caps onto lower locating pin to prevent unintended unhinging.
Attach shelves to pole per mounting instructions supplied with the shelves.
Use Häfele shelf supports; fasten wooden shelves to supports with screws.
Insert transport securing pin above pole to prevent shipping damage; remove before use.
Do not suspend, bend, or place weight on the top mounting bracket.
Place support device under cabinet bottom to prevent sagging under tray weight.
Use adhesive recommended by countertop supplier to attach top mounting bracket.
Depth adjustment aligns the doors to the cabinet face.
Side adjustment modifies the door overlay.
Height adjustment controls the distance between door and countertop.
Adjust closing speed by turning adjustment screw clockwise for quicker, counterclockwise for slower.
To Next Page