hager domovea - 3. CUSTOMISATION AND PARAMETER SETTING; 3.1 Standby mode; 3.2 Parameters

Date : 20/09/2012
6T 8205-02a
User manual
CUSTOMISATION AND PARAMETER SETTING
12
3. CUSTOMISATION AND PARAMETER SETTING
Independent of the specific application in your residence, it is possible to customise certain functions of the domovea
touch panel.
Press on the symbol at the top right of the screen to
access the parameter setting bar.
Select the icon to access the chosen function:
Standby
function
Cleaning
function
Settings menu Device
shutdown
menu
3.1 Standby mode
Press the symbol to start the function.
In this mode, the processor and the screen switch to minimised operation. The system goes to standby mode and
turns off the screen.
Whenever the screen is pressed, the system wakes up and again displays your view.
3.2 Parameters