To Next PageTo Next Page
Need help?Do you have a question about the hager G441-30X and is the answer not in the manual?
General| Brand | hager |
|---|---|
| Model | G441-30X |
| Category | Security System |
| Language | English |
Details the essential programming steps for the GSM telephone transmitter.
Instructions for physically opening the GSM telephone transmitter casing.
Guide on connecting the SIM card and power source to the transmitter.
Covers programming for language, date/time, SIM PIN/PUK, and access codes.
Steps for configuring the transmitter for radio communication.
Steps for configuring the transmitter for hardwired input connections.
Instructions for programming phone numbers and call types for private contacts.
Guide for recording personalized voice messages for the dialler.
Steps for programming numbers for remote surveillance, including call cycle.
Procedure for programming the identification number for protocols.
Setting up the frequency and timing for periodic calls.
Guidelines for choosing an optimal and safe installation location for the dialler.
Procedure to test and ensure adequate GSM signal reception at the installation site.
Steps to test the radio communication between the control panel and the transmitter.
Steps to test the radio communication from the transmitter to the control panel.
Instructions for permanently fixing the GSM telephone transmitter.
Diagram illustrating the wiring for inputs and outputs on the device.
Procedure for testing the functionality of connected inputs.
Instruction to close the device cover before performing tests.
Steps and conditions for changing the dialler to normal user mode.
Tests to verify alarm, anti-tamper, and input functionality.
