212
Controller Receiver
1. Switch to radio link creation mode.
2. Switch to radio link creation mode.
3. Select the function.
9.1.1 The controller is used as a transmitter
Press on the key.
The radio link LED lights up orange.
Information available in the receiver product
manual.
Application examples
By creating a radio link between a controller and an output receiver, the following applications can
be set up:
• gate opening can switch on lighting to facilitate night time access and gate closing can switch
off lighting,
• electrical latch opening can switch on courtesy lighting for a programmable duration,
• etc.
• pressing on the outdoor caller unit call button can trigger a door bell installed elsewhere for a
programmable duration.
Radio link to be created
) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )
To Next Page
Loading...
