10
Installation of the TKP100 controller
The controller may be freely installed in your customer's home
Installation on a at
surface
• Simply place the
controller free standing
on a at surface.
Installation on a wall
• Use the included wall
adapter to x the TKP100
controller on a wall
(screws not included).
Installation in a home networking or multimedia enclosure
•
Home networking or multimedia enclosures allowing a minimum of 50mm host product depth can generally
be equipped with the TKP100 controller.
General Installation tips
The TKP100 is a radio controller and shall be as such
placed :
• as centrally as possible from its associated peripherals
•
away from metal planes,
armed concrete and other
radiofrequency perturbation sources.
Always avoid proximity of heat sources and humidity.
0005587...
GC 03/16
➡ ➡
To Next Page
Loading...