22
TKP100 Reset Modes
Each of those 3 reset modes is triggered from the TKP100 controller itself and use a different reset
sequence, described in detail on page 23.
Network reset
Useful to …
in case of WiFi access code loss
in use with TKH180 Wi extension
What it does :
Re-initialize the network settings.
it will re-open a local access to the
controller
What it does NOT :
This reset mode does not modify
any other setting, installation
pro le, links, or user pro le.
Users reset
Useful to ...
• To de ne a different Referent
User, or correct a wrong
(or mistyped) email address
• For an installer-level user to take
system control.
What it does :
Returns the controller to pre-
Handover state
What it does NOT :
This reset doesn’t modify installation
pro le, links, and other settings.
Factory reset
Useful to …
Restart an installation from scratch.
What it does :
Return the controller to its original
factory state. Be particullary
cautious when using it, since this
Reset procedure will delete all
installation pro le, links, and local
user pro les de ned previously,
and rollback all installed TKP100
controller
software updates.
Warning : When doing
a Factory Reset, it is
mandatory to connect the
controller to Internet for
proper system reactivation
to its original state.
To Next Page
Loading...
