hager unimes H U-PW powerway - System Overview

powerway enclosures and components
System overview
20 U-PW powerway System Manual
03.01 System overview
powerway enclosures
U-PWE
U-PWK
Incoming and outgoing enclosure
Coupling enclosure
System solutions
hw+ series air circuit breaker (HW1)
Enclosure rated voltage
≤ 690 V AC
Expansion technology
– Plug-in technology/fixed installation (version -F)
FFF, FFD/HW1
– Plug-in insertion technology (version -W)
WWD/HW1
Enclosure rated current
– Enclosure depth 600 mm
– 1x H-SaS
≤ 2950 A
– 2x H-SaS
≤ 2x 2600 A
– Enclosure depth 800 mm
– 1x H-SaS
≤ 4000 A
– 2x H-SaS
≤ 2x 3800 A
Device installation position
Vertical
Extension/device operation
– Full extension
From the outside, front installation level 1 (FE1)
– Partial extension
Behind the door, behind front (HF)
Form of internal separation
1-4b
IP protection type
– With convection
– Devices can be operated from the outside
IP3x
[1]
– With additional roof
IPx1
– Without convection
– Devices can be operated from the outside
IP3x
[1]
– With additional roof
IPx1
[1]
In the case of withdrawable ACB in disconnected position
IP2xC