Need help?Do you have a question about the Hague Watermax 10 Series and is the answer not in the manual?
General| Brand | Hague |
|---|---|
| Model | Watermax 10 Series |
| Category | Water Dispenser |
| Language | English |
Guidance on optimizing the performance and efficiency of the WaterMax appliance.
Key actions to avoid during the installation process for the WaterMax system.
Essential installation practices and considerations for the WaterMax system.
Diagram illustrating the standard placement of the WaterMax 10 Series in a plumbing system.
Overview of the buttons and their functions on the WaterMax control panel.
Used to enter SERVICE SETTINGS mode to set operating parameters.
Used to put the appliance into an immediate regeneration.
Used to enter CUSTOMER SETTINGS mode and step through parameters.
Used to change values of parameters and speed up regeneration cycle times.
Used for cursor movement and speeding up regeneration cycle times.
Shows status of control, mode, and operational status.
Shows status of control: NORMAL OPERATING, SERVICE, or CUSTOMER SETTING mode.
Indicates water flow through the WaterMax, useful for checking plumbing and leaks.
Step-by-step guide for setting language, units, and installation date parameters.
Steps for setting #People, Hardness, Iron, Manganese, and Chlorine parameters.
Configuration steps for Iron, Manganese, Chlorine, and capacity settings.
Settings for regeneration frequency, distill/RO, backwash, brine/rinse, and salt amounts.
Timer-based regeneration mode, cycling based on frequency.
Demand-delayed regeneration mode based on water usage and capacity.
Regenerates based on water usage alone when capacity limit is reached.
Procedure for setting the current time and the desired regeneration time.
Steps to set household size and save the customer settings.
Common causes and actions for lack of soft water post-regeneration.
Troubleshooting steps for when the system is not producing soft water.
Diagnosing issues when the water flow indicator light is not active.
Troubleshooting a blinking light when no water is flowing, indicating potential leaks.
Addressing a steady light on the water flow indicator, suggesting turbine issues.
Actions for when the control panel display lights are not illuminated.
Troubleshooting why the appliance remains in the regeneration cycle.
Causes and solutions for excessive water accumulation in the brine tank.
Diagnosing and fixing issues with the regeneration cycle's sequence.
Identifying and resolving the cause of salty water output from the system.
List and illustration of parts related to the main cabinet and cover.
List and illustration of parts making up the brine tank and its assembly.
List and illustration of parts for the media tank, cabinet, and related assemblies.
List and illustration of components for the water softener's injector assembly.
Detailed explanations of the function and installation of injector assembly parts.
List and illustration of parts that constitute the bypass assembly.
Detailed explanations of the function and installation of bypass assembly parts.
List and illustration of parts for the drive end cap assembly.
Detailed explanations of the function and installation of drive end cap assembly parts.
List and illustration of parts for the brine valve housing assembly.
Detailed explanations of the function and installation of brine valve housing parts.
List and illustration of parts for the fill plug assembly.
List and illustration of parts for the drain end cap assembly.
List and illustration of parts for the safety shutoff assembly.
Step-by-step instructions for installing the brine valve elbow assembly.
Chart correlating brine cabinet depth to salt usage per regeneration.
Information on what the warranty covers, including duration and exclusions.
Steps for reporting defects and initiating a warranty claim.
To Next Page
