Hahnel Tuff TTL User Manual

Tuff TTL
Wireless Flash Trigger
Instruction Manual
Switch on transmitter,
receiver, camera and flashgun.
Red flashing LED on both units
indicates Power ON & status ready.
Ready to take a test photograph.
Transmitter
Receiver
Insert AA Batteries
into Transmitter
Insert AA Batteries
into Receiver
Remove Covers
Attach
transmitter
to camera
Attach receiver to flashgun
Tuff TTL will work with
flashgun in ETTL or in
manual mode
A
B
C
D
E

Hahnel Tuff TTL Specifications

General

Compatibility	Canon, Nikon
Guide Number	58 m (ISO 100, at 105mm zoom)
Recycle Time	Approx. 3 seconds
Power Source	4 x AA batteries
Zoom Range	24-105mm (manual zoom)
Flash Modes	TTL, Manual