To cancel false alarms or test your system call – (913) 432-4545
For sales or service for you Atronic alarm call -- (913) 362-0000
YOU MAY CALL EITHER OF THESE NUMBERS AFTER HOURS TO REACH OUR 24 hr
EMERGENCY TECHNICAL SUPPORT TECHNICIAN
WWW.ATRONICALARMS.COM
WWW.ATRONICALARMS.COMWWW.ATRONICALARMS.COM
WWW.ATRONICALARMS.COM
HAI Omni Quick Reference Guide
Arming your system:
Pressing any of the arming buttons twice, or pressing any of the arming buttons
once followed by your code will arm the system in the desired mode.
Arming Buttons:
Adding or changing codes:
Press 9 + your code + 1 (Code). You are now at “Code 1” this is the Master code
slot. Enter the code you would like (4 digits) and press #. To add an additional
user code scroll down to “Code 2” and enter a new code (4 digits) and press #.
Bypassing a zone:
Press 2 + 8 + Scroll down to the desired zone and press # then your code.
(To un-bypass press 2 + 9 + 0 + # + your code)
Panic Buttons:
Press & hold as shows below to activate panic alarms (Note: Immediate Dispatch)
Hold buttons 1 & 3 for POLICE
Hold buttons 4 & 6 for FIRE
Hold buttons 7 & 9 for MEDICAL
Resetting System & Clearing Troubles:
If you have any “trouble” type messages always try pressing * to clear the system
If the system is beeping and you are unsure why try pressing * to clear the system
If you have a fire alarm you must arm and disarm the system to reset your system
Need help?
General