Haier 43E4500R User Manual

38
panel buons” on page 34 .
Changing channels
To change channels, you can do any of the following:
• Press to change to the next higher channel.
• Press to change to the next lower channel.
• Press to display the channel list, and then press and to move the highlight through the list one
channel at a me. Or press and to move the highlight through the list one page at a me. When
you’ve highlighted the channel you want to watch, press OK. (If you decide you don’t want to change
channels, press or ).
• Press to jump to the previous channel. Press again to return to the channel you were watching before
you pressed.
Note
: If is not available on your remote control, you can use on the Roku App or the Jump Back
buon on a universal remote. For more informaon, see “Other devices” on page 67 .
Viewing program informaon
To view informaon about the current program, press OK. The TV displays a banner at the boom of the screen with
as much informaon as is available in the program data stream.
Program informaon banner
Program informaon, subject to availability, includes:
• Channel number
• Channel call sign
• Signal strength
• Program tle
• Start me, end me, and graph of program length showing current posion
• Content rang
• Video resoluon (480i, 480p, 720p, 1080i, 1080p)
• Audio quality (Mono Dolby Digital, Stereo Dolby Digital, 5.1 Dolby Digital, Dolby Digital+)
• Audio features (SAP)
• Closed caponing (CC)
• Current me

Haier 43E4500R Specifications

General

Brand	Haier
Model	43E4500R
Category	HDTV
Language	English