Electic Control and
Debugging
423
Super Match
①
Online units display area:
it displays the number of the units controlled by one wired controller
②
Special function/fault icon display area:
such as weekly timer, Swing, sleep, children lock, force, air exchange and energy conservation; each icon
corresponds to a function; if a fault appears, the fault icon is displayed.
③
Mode display area:
intelligent, heating, cooling, dehumidication and fan modes (the single cold mode has only cooling,
dehumidication and fan modes; the single heat mode has only heating and fan modes;except when DIP switch of
indoor unit has mode limit. )
④
Left function key function prompt area
⑤
Set temperature display area:
The range of adjustment is 16°C to 30°C (except when in the setting of energy conservation function).
⑥
"Menu/main interface/input" key function prompt area:
if any function is prompted here, press the menu/main interface/input to execute the prompted function
⑦
Date and time display area
⑧
Status indication area:
Indication of the master/slave unit of the wired controller, lter screen cleaning prompt/defrosting status indication/
forced defrosting issuance prompt, operation/standby status indication.
⑨
Swing:
Dynamic display during setting of swing (single swing, or both swings or no swing, depending on the set air
direction)
⑩
Right function key function prompt area
Air speed display area:
Automatic, weak air, moderate air, strong air; the fan mode has no automatic air
To Next Page
Loading...
