Before going to bed, you can simply press the SLEEP
button and unit will operate in SLEEP
starts, temp. will become 1
higher than temp. setting.
another 1 hours, temp. rises by
is higher than temp. setting so
that room temperature won’t be
mode starts, temp will become
ºC lower than temp. setting.
The unit operates in corresponding sleep mode, which
adapted to the automatically selected operation mode.
4. When quiet sleeping function is set to 8 hours the
quiet sleeping time can not be adjusted. When
function is set, the quiet sleeping function can’t be
After the sleeping function is set up, if user
TIMER function, the sleeping function will be
cancelled; the machine will be in the state of timing-
on, if the two modes are set up at the same time, either
, and the other mode will be cancelled.
Power Failure Resume Function
not start running unless 3 minutes have elapsed. When
the power resumes after power failure, the unit will run
, and 3 minutes later the compressor starts
Note to the power failure resume:
enter function after hearing four sounds.
this function after hearing two sounds.
Comfortable SLEEP
setting so that room temperature won’t be too high for
TIMER
10
SMART
8