4 Wiring of indoor unit
The distance between the signal wires and the power cabes should be at least 50mm.
C
BA
Q
P
1(L) 2(N)
2(N)1(L)
P
Q
A B
C
L N
C1 C2
To other
indoor unit
To wired controller(A,B,C)
To outdoor unit
(P Q)
Waring:
1.Incorrect address setting will cause abnormal to the system.
2.Communication cable must be use sheilded type.
Communication cable (Shield wire):
H05RN-F 2X1.5 mm
2
Power cable : H05RN-F 3G 2.5 mm
2
-
>_]]VbTZR\ <Zb >_^UZdZ_^Vb
73-
To Next Page
Loading...
