Haier AU482FIBHA - Installation Drawing of Outdoor Unit

5
Notice:
1. Designed capacity when installing (total capacity of all the indoor unit connected to) *130% of rated capacity of
outdoor unit
2. Total capacities of indoor units being used * 100% of rated capacity of outdoor unit.
3. After installing the cassette air conditioner, please paste the label (Accessories of the indoor unit) to the middle of
the lower frame of air outlet.
Outdoor unit
1
3
2
MP2A
Electronic
Expansion Valve
18 Ceiling concealed type
12 Wall mounted type
09 Ceiling concealed type
Piping
Position
Gas pipe Liquid pipe
15.88mm
9.52mm
12.7mm
6.35mm
9.52mm
6.35mm
Following is an example:
Model: Outdoor unit AU482~522 type
Outdoor unit
1
3
2
MP2A
Drop height
between indoor
units h*10m
Electronic
Expansion Valve
18 Ceiling concealed type
12 Wall mounted type
09 Ceiling concealed type
Piping
Position
Gas pipe Liquid pipe
15.88mm
9.52mm
12.7mm
6.35mm
9.52mm
6.35mm
Model: Outdoor unit AU48~60 type
Following is an example:
Outdoor unit
1
Drop height
between indoor
units h*10m
Electronic
Expansion Valve
18 Wall mounted type
12 Wall mounted type
2
Electronic
Expansion Valve
HEALTHOPERATE
TIMER POWER
Piping
Position
Gas pipe Liquid pipe
15.88mm
9.52mm
12.7mm
6.35mm
Following is an example:
Model: Outdoor unit AU242~342 type
Installation Drawing of Outdoor Unit
Maximal length and drop height permissible of refrigerant piping,please look page 10.
Drop height
between indoor
units h*10m