6
MARK
PARTS NAME
Adhesive tape
Pipe clip
Connecting hose
Drain hose
Insulation material
Putty
Installation dimension
of outdoor unit (mm)
190 190
380
580
More than 60cm
Shape and description QTY Remark
Rubber pad
1
Big wire clamp
4
Standard accessories
Following parts shall be field supplied.
Tools Necessary
Unit fixing
Fix the installation bracket in the selected area according to the dimension as shown in the
Fig. Then fix the outdoor unit to the installation bracket.
>10cm
>10cm
>60cm
>15cm
Installation Tools
1. Screw driver
2. Hacksaw
3. 70mm Dia. Hole core drill
4. Spanner [Dia. 17,27mm]
5. Spanner [Dia. 14,17,19,27mm]
6. Cutting tool
7. Flaring
8. Knife
9. Nipper
10. Gas leakage detector or soap water
11. Measuring tape
12. Reamer
13. Refrigerant oil
14. Vacuum pump
15. Nitrogen tanker
To Next Page
Loading...
