7
Installing method of convertible type unit AC182FEAHA, AC242FEAHA
8-13mm
(1).
Arrange the wall outlet hole and install the support fixinghole according to the following diagram; drill*10 x 60 holeon the position of support fixing hole; drill the wall outlethole on the selected position of the wall outlet hole.
As shown in the diagram, fix the support with expansion bolt.
Install indoor unit
First, install the bolts at both sides of the indoor unit as shown in the diagram, then, install theindoor unit according to the method as shown in the diagram, and finally tighten the bolts.
Install drainpipe
For the installing method and leading-out direction of the drainpipe, please refer to the previous pages.
Note: the drainpipe should be lower than the connecting portion where it is connected to the indoor unit
as shown in the following diagram:
install support
fixing hole
ceiling
wall
selectable position for wall outlet hole
1244mm
326mm
bolt
indoor unit
bolt
support
indoor unit
drainpipe
make the drainpipe lower
than the connecting portion
where it is connected to the
indoor unit
correct incorrect
Fix the support
(2).
(3).
(4).
Model
AC182FEAHA
AC242FEAHA
Liquid pipe (mm)
Gas pipe (mm)
*15.88*9.52
*15.88*9.52
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
