Haier CPRB08XCJ - Page 6

OPERATION
CONTROL PANELCONTROL PANEL
- 5 -
Power Control
The power control turns the unit on and off.
Mode Control
The Mode Control has 3 settings:
● Cool ● Dehumidify ● Fan
The settings are adjusted by Mode Control button.
● Cooling Mode
During the cooling mode the air is cooled and
hot air is exhausted to the outside through the
exhaust tube. Adjust fan speed and air
temperature to suit your desired comfort level.
Note : The air exchange hoses must vent
outside the room when using Cool Mode.
● Dehumidify Mode
Air is dehumidified as it passes through air
conditioner, without being in full cooling mode. If
room temperature is higher than 25°c, fan speed
can be adjusted; otherwise fan speed is fixed
to " low ".
Note : If the unit will be used mainly as dehumidifier,
do not connect the exhaust hose and let the warm air
return in the room.Continuous drainage is then necessary
and more efficient
● Fan Mode
Air is circulated throughout the room with no
cooling.
Note: unit does not need to be vented in
Fan Mode.
Fan Speed Control
The Fan Speed Control has 3 settings: Auto, High,
Medium, and Low.
Temp Set Controls
Press " Up " or " Down " to set temperature, The setting
range is from 61℉ to 89℉.
Note: When using DEHUMIDIFITY or FAN MODE,
temperature setting button invalid.
Timer Seting Control
● When
● When
● If you
● Timer setting range is 1~24 hours.
you use the timer setting button while the
unit is operation, you can preset a timer for the
unit to turn off.
you use the timer setting button while the
unit is on standby, you can preset a timer for the
unit to turn on.
press the "ON/OFF" button, the preset
timer function will be cancelled.