Notice: Differences depending on model
Due to different models, your product may not have all of the following features. Please
refer to chapter PRODUCT DESCRIPTION.
7.1 Multi-air-flow
The refrigerator is equipped with a multi-air-flow
system, with which cool air flows are located on every
shelf level (Fig. 7.1). This helps to maintain a uniform
temperature to ensure that your food is kept fresher
for longer.
7.2 Adjustable shelves
The height of the shelves can be adjusted to fit your
storage needs.
1. To relocate a shelf, remove it first by uplifting its
hind edge (1) and pulling it out (2) (Fig. 7.2).
2. To reinstall it, put it on the lugs on both sides and
push it to the most rearward position until the rear
of the shelf is fixed inside the slots in the sides
Ensure that all ends of a shelf are level.
7.3 Removable door racks
The door racks can be removed for cleaning:
Place hands on each side of the rack, lift it upwards (1)
and pull it out (2) (Fig. 7 3).
In order to insert the door rack, the above steps are
carried out in reverse order.
7.4 My Zone drawer
For use and setting of the My Zone compartment
(Fig. 7.4) please check section USE (My Zone drawer).
7- Equipment
24
GB
7.5
OPTIONAL: OK-temperature indicator
The OK-
temperature (Fig. 7.5) indicator can be used
to determine temperatures below +4°C. Gradually
reduce the
temperature if the sign does not indicate
"OK".
Notice: OK-sticker
When the appliance is switched on, it may take up to 12 hours for the correct
temperatures to be reached.
7.6 Removable freezer drawer
To remove the drawer out, pull out to the
extent (1), lift and remove (2) (Fig. 7.6).
In order to insert the drawer, the above steps are
carried out in reverse order.
7.7 Removable water tank
The water tank (Fig.7.7) can be removed and reinstalled
for cleaning in the same way as the door racks.
Insert water tank
Place the water tank in the position that the water outlet (B)
fits into the opening of the door. Make sure that
tank is locked.
Notice:
~ If the water tank is not properly inserted, water can drip from the connection.
~
Do not use excessive force when removing or installing the water tank, to avoid
damaging the tank.
7.8 3D-freezer drawer
The freezer drawers (Fig. 7.8) can be extended
straightly and completely. They are mounted on easy-
roll telescopic runners, so that you can store and
remove the freezing good comfortably. Because of
the automatic
door closing mechanism the handling is
easy and you save energy
WARNING!
Do not overload the drawers: Max. load of each drawer: 35 kg!.
To Next Page
Loading...
Need help?
General
