Haier HD80-A2939 - Additional Data; Product Dimensions

EN
13-Technical data
29
Power supply (refer to rating plate) - voltage / current / input
550 W
Permissible ambient temperature 5°C to 35°C
Fluorinated greenhouse gas
Volume
GWP
Tonne(s) of CO
2
equivalent
HFC-134a
0.26 kg
1430
0.6
Additional data
1)
Based on 160 drying cycles of the standard cotton program at full and partial load, and the
consumption of the low-power modes. Actual energy consumption per cycle will depend on how
the appliance is used.
2)
In case there is a power management system.
3)
This program used at full and partial load is the standard drying program to which the infor-
mation in the label and the fi che relates to. This is the program suitable for drying normal wet
cotton laundry and it is the most effi cient program in terms of energy consumption for cotton.
4)
Class G is the least effi cient and Class A is the most effi cient.
0.28 kg
(A+++)
(A+++)
TOP VIEWL LAW
FRONT VIEW
A
B
F
E
C D
HD90/ 80
PRODUCT DIMENSIONS
B
Overall width of product mm
A
Overall height of product mm
C
Overall depth of product
Overall depth of product mm
(To main control board size) mm
D
Depth of door open mm
E
F
Minimum door clearance
to adjacent wall mm
Product dimensions
850
595
600
665
1135
250
Note: The exact height of your dryer is dependent on how far the feet are extended from
the base of the machine. The space where you install your dryer needs to be at least
40mm wider and 20mm deeper than its dimensions.
220–240 V~50 Hz/ 2.4A/
(A++)
/630W(A++)