16
2. After leveling, press down on the Caster lever to lock the casters before using
the washer.
•
To Lock - Press down on Caster lever.
•
To Unlock - Lift up on Caster lever.
STEP 6 - SECURE THE DRAIN HOSE
1. Put the drain hose hook end in a drain pipe or laundry tub.
2. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a
leg on the laundry tub. See “Drain System Requirements” for details.
STEP 7 - CONNECT THE WATER HOSE
Depending on your model, the water hoses provided will be either Style 1 or Style 2.
Follow the instructions specic to the style of water hoses provided.
IMPORTANT: Only use new hoses when installing the washer. The water hoses must
have a coarse thread connectors on one end (to connect to the household water
supply), and ne thread connectors on the other end (to connect to the washing
machine).
NOTE: Periodically inspect hose for cracks, cuts, leaks or wear. Replace with new
hose every 5 years.
1. Check that a at washer is present and rmly in place in each end of the water
inlet hose. Flat washers are pre-installed at the factory.
Style 1 Style 2
A
To Next Page
Loading...
Need help?
General
Weight and Dimensions
