EasyManua.ls Logo

Haier HPYD12XCN - Functions Setting; Core Functions and Modes; Control Panel Buttons; Operation Modes Explained

Haier HPYD12XCN
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functions Setting
This portable air conditioner has three functions: cooling, dehumidifying and fan. Fan
has two speeds: high speed and low speed, setting temperature is 17--30℃(6286
℉), 24 hours timer, sensor and water-level protective function.
Buttons:There six keys on the control panel: POWERModeFan Speed, Timer, Up key and
Down key .
a). POWER Key: Press the key to start the unit ,and press this key again to turn unit off.
b). Mode Key: Set the Cooling , Dehumidifying and Fan Mode when unit is working or
Timer-On Situation.
manner, but not available in dehumidifying mode.
d). Timer Key: Can set the Timer-Off function in unit working situation, when setting the
time,the Regular time indicator will illumine; can adjust the time again while the Regular time
indicator will illumine; then it will display the room temperature again in the Off mode. Can also set in the
Timer-On function,same as above setting.
After the Timer-Off or the Timer-On, the Timer indicator lights.
e).Up\Down Key: Press this two key to set the desired room temperature.(Press the Up
key once,the temperature will increase by 1 or 1, also press the down key to decrease by 1 or 1),
can also set the time in Timer Situation; can also exchange from to display by pressing these two
keys at the same time.
* the user wants to display the temperature in , you can use the button on the remote controller or press the
up and down key simultaneously.
Operation instructions:
a) In the Cooling models:
Ta≥Ts+1 (1), the cooling starting.
Ta≤Ts1 (1), the compressor stops and only the fan motor remains working at
the set fan speed.
TaRoom Surrounding Temperature TsSetting Temperature
In the mode,pressing Timer and Down button can set sleep function, In sleep
function, After operating two hours, the set temperature increases 1(1)
automatically. After operating for another 2 hours, the set temperature will
increase 1(1) again. Then, the set temperature will not change and the
fan is forced to switch to low level.

Related product manuals