Haier HPYD12XCN - Mechanical Parts - Duct Bracket

8.take out the down air duct foam.
9.Using a wrench loose screws which fix down- fan wheel,remove screw,down-fan wheel and
10.According to the above steps to remove the parts.
1.Refer to 1.1 remove front panel and back panel
2.Refer to 1.2 remove electrical box cover
3.Refer to 1.3 remove up-fan duct.
4.Refer to 1.4 remove down-fan duct
5.Remove the 2 down-air duct bracket screws which under chassis
6.Refer to picture,remove down-fan duct.
7.According to the above steps to remove the parts.
1.5 down-air duct bracket
washer in order