Preparation
Unpacking
Remove all packing materials.
Check attached accessories
and materials.
Check if all accessories specified in the
Packing List are available. Contact the
local distributor if shortage is found.
Ensure that the appliance is
properly located.
(See section “Location”)
Clean the appliance before
using.
(See section “Cleaning”)
Time lapse before power supply
Connect the appliance to power source at
least 30 minutes after the appliance is sited
and cleaned.
Operation
Manual
Warranty
Certificate
Caution: After unpacking, write down the model and manufacture number of
the appliance on the Warranty Certificate which will be required if technical
services are applied for.
To Next Page
Loading...
