GB
5- Use
Notice: Panel lock
The control panel is automatically blocked against
activation if 30 seconds no key is touched. For any
settings the control panel must be unlocked.
5.7 Select the working mode
You may need to select one of the following two ways to set the appliance:
13
5.5 Lock/unlock panel
▶ Touch key “F” for 3 seconds to block all panel ele-
ments against activation (Fig. 5.5). An acoustic sig-
nal sounds .
▶ The related indicator “f” is now displayed and the
lightening of the panel is switched o. The icon
ashes if a key will be touched, when the panel lock
is activated. The change is not running.
▶ For unlocking touch again the key.
5.5
5.6 Door opening alarm
When one door is opened for more than 3 minutes, the door opening alarm will sound. The
alarm can be silenced by closing the door. If the door is left open for more than 7 minutes,
the light inside the compartment will automatically switch o.
5.7.1 Fuzzy mode
If you do not have any special requirements, we recom-
mend that you use fuzzy mode :
In the Fuzzy mode, the appliance can automatically ad-
just the temperature setting according to the ambient
temperature and temperature change in the appliance.
This function is totally hand free.
1. Unlock the panel by touching key “F” if it is locked
(Fig. 5.5).
2. Touch key “C” (Fuzzy) (Fig. 5.7.1-1).
3. Indicator “c2” illuminates and the function is acti-
vated (Fig. 5.7.1-2).
By repeating the above steps or selecting an other
function this function can be switched o again.
Fuzzy
3 Sec. Holiday
Fuzzy
3 Sec. Holiday
5.7.1-2
5.7.1-1
To Next Page
Loading...
Need help?
General
