Haier HRF-660S - Door removal

To Next Page

To Previous Page

SERVICE MANUAL

Model:HRF-660S

Issue 201001

Rev.

Ref1001S008V0

Chapter 3 Installation, adjustments and maintenance

3-1. Install Handle

First, screw part2 into the threaded hole in the door (part1); there are two screws per door. Next,

press part3 with its larger opening onto part2. Finally, pull part3 down in order to attach it firmly to the

door.

3-2. Below decorative moulding

Open the refrigerator and freezer doors, remove the moulding from the refrigerator compartment, and

then affix it as shown in the illustration.

Part 1

Part 2

Part 3

Other manuals for Haier HRF-660S