8. If no above problems, it
means that motor is
defective and should be
replaced
replace new ice-maker motor or
ice-maker assembly.
/
Problem 2: No crushed ice
Problem
phenomenon
Checking steps Photo description
1) Open the freezing door, make sure the selecting bar
under the storage box is good shape or not stick into the
selecting valve.
No crushed ice
2) Disassemble the ice storage box, make sure the ice
blade is in fine shape.
/
Problem 3: No ice cube
Problem
phenomenon
Checking steps Photo description
1) Open the freezing door, make sure the selecting bar
under the storage box is good shape or not stick into the
selecting valve.
2) Disassemble the ice storage box, check if the ice
cubes are stick together. If so, shorten the water time.
Refer to water inlet quantity
setting
no ice cube
3) Set the appliance under ice cube condition, open the
freezing door and press the freezing light button , press
dispenser button. See if the selecting valve works or not.
If not, disassemble the delivery motor to see if the
plug-in of selecting valve is in place, or the wire of
selecting valve is in good shape.
/
6(59,&(0$18$/
0RGHO+5),6%8
,VVXH
5HY 5HI69
To Next Page
Loading...
