Haier HRF-663ISB2 - Page 15

SERVICE MANUAL
Model: HRF-663ISB2
15
Issue 2010-01
Rev.
Ref1001S015V0
Temperature Parameters
Refrigerator
setting
Refrigerator sensor 2
Freezer
setting
Freezer sensor
ON OFF ON OFF
+7
ć
+7.5ć +4.5ć -15ć -15.5ć -18.5ć
+6
ć
+6.5ć +3.5ć -17ć -17.5ć -20.5ć
+5
ć
+5.5ć +2.5ć -18ć -18.5ć -21.5ć
+4
ć
+3.5ć +0.5ć -20ć -20.5ć -23.5ć
+3
ć
+1.5ć -1.5ć -22ć -22.5ć -25.5ć
2.1 How to select a temperature setting
(1)The appliance is preset at fuzzy mode, which can be inactivated by a press of Fuzzy Mode button.
(2)The temperature setting of freezer compartment / refrigerator compartment are set by the freezing and
refrigeration keys on the display panel respectively..(Fuzzy mode must be inactivated.)
(3) The freezing/ refrigeration keys correspond with display icons.
(4) Press and hold down the refrigeration key for 3 seconds, the refrigeration operation in refrigerator
compartment is deactivated and its temperature setting display is off; press and hold down it again for 3
seconds, the refrigeration function is resumed and its temperature setting display is on. When the
refrigeration function is suspended, the refrigeration load is canceled in correspondence to 2.
2.2 Displays
(1) Press freeze or cold storage key once to obtain the next higher setting until the highest setting is
reached. Press again to return to the lowest setting.
(2) Room Temperature Sensor (RT SNR) The startup and shutdown parameters can be adjusted with the
temperature change of RT SNR.
RT20°C 20°C<RT35°C 35°C<RT
Freeze -2°C -1°C -2°C
Cold storage +1°C -1 -2°C
Freeze
1ĺ2ĺ3ĺ4ĺ5ĺ1 / The sequence of temperature displays is:
-15°Cĺ-17°Cĺ-18°Cĺ-20°Cĺ-22°Cĺ-15°C
Cold storage
1ĺ2ĺ3ĺ4ĺ5ĺ1 /The sequence of temperature displays is:
7°Cĺ6°Cĺ5°Cĺ4°Cĺ3°Cĺ7°C
Type Display