• There will be approximately a 3 degree variance +/- between the
temperature you select and the temperature indicated on the LED
readout.
This occurs because the wine cellar activates and deactivates
trying to maintain your desired temperature. There is often a
variance between the top and bottom shelves of the wine cellar.
Therefore, if you have set the wine cellar for 50˚ and have a
mix of red and white wines, you may want to put the white wine
on the bottom shelf where the temperature will be cooler, and place
the red wine on the top shelf where the temperature will be warmer.
fig. # 1
8
English
Set
Red
White
TEMPERATURE
Down
Up
To Next Page
Loading...
Need help?
General
