Beforeyouinstallyourairconditioner,checkthefollowing:
1}
The unit is free of ail obstructions inside and outside the room,e.g, drapes,
curtains, furniture, plants, shrubs,bushes,trees, other structureslike buildings,
garage,etc. The air conditioner must have a dear, unobstructed airflow through
the condenser to remove heat.
2) Thewindow is strong enough to hold theweight of the air conditioner.
Extra brackets or supports may be needed depending on your windows.
(Bracketsor supports not provided in all models)
3) Thewindowsill and track are strong enough to hold the weight of the
air conditioner.
4) Thewall is strong enough to hold the unit. Extra bracketsor supports may be
needed depending on the wall. (Bracketsor supports not provided in all models)
5) There isadequate and proper power supply near the air conditioner.
_6) Be careful of exposed sharp edges of the cabinet and sharp coils (fins) on
the back of the unit that could cut and cause serious injury.
,_7) DO NOT useadapter plugs.
_,8) DO NOT useextension cords.
_k9) DO NOT cut or remove the ground prong.
_l_ 10) DO NOT modify the plug or the ebctrical wall outlet in any way.
if pbg does not fit the ebctrical outbt have a certified ebctrician do the
necessarychange.
_1_,1] ) DO NOT connectebctricaJ power to the unit before installation.
_kl 2) DO NOT useif power cord is worn out, frayed or otherwise damaged.
Avoid using if there are cracks or abrasion damage along the bngth,
plug or connection.
_,13) DO NOT install into any existing cabinet or sbeve which does not have side
and top air vents.
g
To Next Page
Loading...
