o
o
Always unplug your air conditioner before c|eaning.
The air filter behind the inlet grille should be checked and cleaned at least once
every 2 weeks (or as necessary) to maintain optimal performance of the air
conditioner.
How to remove the air filter
1. The grille may be opened from the top for easy maintenance after installation.
2. Open the inbt grilb by pulling off the exposed door on the top of the unit (based
on the installation).
3. Pull the tab slightly to release the filter. Pull the filter in the same direction as
the opening.
4. Clean the filter with warm, soapy water. The water should be bdow 40°C(104°F).
5_ Rinse off and gently shake off excess water from the filter. Let it dry before
replacing it.
DO NOT use your air conditioner without the air filter in place.
To dean the front panels or the cabinet DO NOT use harsh
chemlcals, abrasives, ammonia, chlorine, bleach, concentrated
detergents, solvents or metal scouring pads.
Some of these chemicals may dissolve, damage and/or discolor your
air conditioner.
Always use a soft cloth dampened with water or mlld soap
and water solution to wipe the front of the cabinet.
Wipe dry with a soft cloth.
14
To Next Page
Loading...
