Energy Saver: By pressing this key you will activate the unit to go in the
energy saver mode. The fan will be off 3 minutes after the compressor
cycle off. By deactivating it the fan keeps running at the set speed even if
the compressor shuts off. (See Fig. # 7) (This function is available in the
cooling function only)
Fig. # 7
Control Panel
iij!!!!!!!!iiiiliiiiiiiiiiiiiiiiiiiiiili!i!iii!iiiiiii!iiii
When unit is in "Energy Saver" mode the LEDdisplay will show
room temperature. Pressthe (A), (v) key to get set temperature.
13
To Next Page
Loading...
