EN
Troubleshooting
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
improper repairs can cause considerable consequential damages.
▶ A damaged supply should only be replaced by the manufacturer, its service agent or
26
Error Code
P2
H1
H2
L2
L3
E6
E8
The opening time of the
door is too long.
The temperature of the upper
temperature zone is too high.
The temperature of the lower
temperature zone is too high.
The temperature of the upper
temperature zone is too low.
The temperature of the lower
temperature zone is too low.
The upper fan motor fault .
The lower fan motor fault.
Please close the door.
Please contact our after-sales service.
Please check ambient temperature
should be between 10 °C and 38 °C.
Please contact our after - class service.
Cause Solution
To Next Page
Loading...
Need help?
General
