14
USB Function
• Functions of USB interface
The computer has a USB function. Test data can be exported via the USB port. The computer can
automatically collect and store the test data within the recent 10 years. It collects data every other
6 minutes and stores them automatically. The latest data will automatically replace the earliest data
when the data storage is full.With a USB port plugged in, the computer will automatically identify
it and start to export data to the USB port.In the data exporting process, if you press “Lower”, the
screen will blink “USb”, which indicates the data are now exporting and not fi nished yet. After blinking
5s, it exits and displays the actual temperature in the case.If the displays “ALL” stably, the data export
is finished. It exits 5s later can displays the actual temperature in the case.The USB port can be
removed at this point. The exported data are in the following formats:
Date Time Inner Temp Setting Temp
20191108 11:21 4.1 4
20191108 11:27 4.1 4
20191108 11:33 4.1 4
... ... ... ...
• Time setting of USB interface data recording (time system current setting):
Press the “Lower” for 10s and the display area of inner temperature shows “1P” stably. Press
the“Upper ”and “Lower” to switch to 2P(month),3P(day),4P(hour),5P(minute),6P(second). To set
the year,press the “Set” on the 1P screen,the display area fl ashes the year.Press the “Upper ” or
“Lower” to select the year, and the display cycles from 15 to 99,If 2019 is set, select 19, press the
“Set” to save confi rmation and automatically return to 1P.Press the alarm button or no operation in 10
seconds, it will return to the box temperature display.
Caution
Please checking the time before use, if the time is not right, follow the upper method
to adjust the time. Wait for one minute to download the datas after adjustment.
11
Component Names ● Control Panel
Component Names
• HYC-410
Door lock
USB port(Optional
Battery
switc
h
)
Door ajar
alarm switc
h
Interior light
Shelf
Glass door
To Next Page
Loading...
