6
Product Features
This product is designed to store biological and biomedical products at a temperature of 2 to 8 C.
Typical installation sites include pharmacy stores, pharmaceutical factories, quarantine stations,
health centers, and hospitals.
1. Temperature Control
• The system
'
s temperature is managed by a microcomputer. Temperature increment for
adjustment is 0.1 C.
2. Safety System
• Includes alarm for multiple conditions such as high and low temperature, high ambient
temperature, door ajar, power failure, low battery, sensor failure, communication failure and hot
condenser heat alarm;
• Alarm modes are audible buzzer, visual and remote contact.
• All independent components are grounded.
3. Refrigeration System
• Optimized refrigeration system, hermetically sealed refrigeration compressor
• Automatic defrost maintains optimum cooling capacity
4. State of the art design
• Smart and carefree Microprocessor control of temperature,
• Adjustment not needed
• High performance thermal insulation
• Automatic condensate removal without drain lines
Note: Technical information might be somewhat diff erent on your refrigerator than published
due to continuous improvement.
To Next Page
