Haier JC-112G User Manual

Remove all packaging material, including foam base and adhesive tape holding accessories.

Use the four leveling legs to adjust the height and ensure the cooler is stable and level.

Ensure adequate space around the unit for proper airflow and efficient operation.

Ensure proper outlet (220-230V, 15A) with grounding; avoid adapters or cutting ground wire.

Avoid uninsulated/unheated locations; select hard, flat surface away from heat sources.

Unit is designed for free-standing installation only, not built-in.

Plug unit into an electrical outlet and let it run for at least 30 minutes to acclimate before adjustments.

Adjust temperature using 'White Wine' and 'Red Wine' buttons for desired cooling settings.

Shelves are designed for flexibility, easy cleaning, and can be moved for bottle accommodation.

Soft light complements wine collection. Push 'Light/Set' button to turn on/off.

Safety feature for child entrapment. Door won't lock until key is removed.

Sounds like boiling water, gurgling, or thermostat clicks are normal.

Unplug unit before cleaning. Use mild cleaning solution of baking soda and water.

Unplug unit during power outages. Replug when power is restored.

Unplug, clean, leave doors open for vacation. Move vertically when relocating.

Check plug, outlet, and circuit breaker for power.

Check door openings, recent additions, gaskets, coils, and temperature setting.

Adjust temperature control to a warmer setting.

Check for normal operation in high humidity, door openings, coils, gaskets, and door closure.

Normal in high humidity. Check door openings, prolonged use, and gaskets.

Level the wine cooler and check for blockages like bottles or shelves.