Haier JC-82G - Page 23

59 0072140003 Light cover JC-82G 1 0.005% 0.010%
60 0077010010 Cross-channel pan-head self-tapping screw JC-82G 2 0.005% 0.010%
61
0070700532
Evaporator JC-82G 1 0.005% 0.010%
62 0077010007 Cross-channel pan-head self-tapping screw JC-82G 4 0.005% 0.010%
63 0077010010 Cross-channel pan-head self-tapping screw JC-82G 1 0.005% 0.010%
64 0072060019 Evaporator cover JC-82G 1 0.005% 0.010%
65 0071250052 Sensor clamp JC-82G 1 0.005% 0.010%
66 0077010018 Cross-channel pan-head self-tapping screw JC-82G 1 0.005% 0.010%
67 0072040095 Down hinge cushion JC-82G 1 0.005% 0.010%
68 0070803374 Down hinge JC-82G 1 0.005% 0.010%
69 0077050017 Cross-channel pan-head screw JC-82G 3 0.005% 0.010%
71 0070101405 Foot bolt JC-82G 4 0.005% 0.010%
72 0070200677 Control panel box JC-82G 1 0.005% 0.010%
73 0077010002 Cross-channel pan-head self-tapping screw JC-82G 4 0.005% 0.010%
74 0070200423 Control panel box cover JC-82G 1 0.005% 0.010%
75 0077010016 Cross-channel pan-head self-tapping screw JC-82G 4 0.005% 0.010%
76 0070100768 Plate wine support (I) JC-82G 2 0.005% 0.010%
77 0070100769 Plate wine support (II) JC-82G 1 0.005% 0.010%
78 0070200640 Close nip JC-82G 4 0.005% 0.010%
79 0070100767 Double layer wine support JC-82G 1 0.005% 0.010%
80 0076100041 Lock attention JC-82G 1 0.005% 0.010%
81 0072130017 Up hinge axle sleeve JC-82G 1 0.005% 0.010%
82
0078100164
Door JC-82G 1 0.005% 0.010%
83 0071150026 Lock JC-82G 1 0.005% 0.010%
84 0071150038 Key JC-82G 1 0.005% 0.010%
85 0072130010 Down hinge axle sleeve JC-82G 1 0.005% 0.010%
86
0072050098
Enclose bar JC-82G 1 0.005% 0.010%
87
0070503200
User manual JC-82G 1 0.005% 0.010%
88
0070501227
Carton JC-82G 1 0.005% 0.010%
1,The failer rate and the proportion of the spare-part stock are regarded as the reference of the stock for spare-parts;The
first time should be stocked accroded with the proportion of the spare-parts,and it should be adjusted with the actual quantity
3 months later.
2,easy-damaged;The spare-part which is often damaged and the customer must stock in the spare-parts warehouse,and
should be marked with"*"
3,possible damaged:The spare-part which is not often damaged like the easy damaged one and the customer may stock in
the spare-part warehouse accord with the actual case,should be marked with " ".
4,not need provided :The spare-part which is seldom damaged or the maintenance man could not maitmains.The spare
parts may be air freighted by the factory if they were damaged.The customer nees not stock in the spare-part
warehouse,should be marked with " x ".
5,Above should be improved accord with the reply of the market half a year per time.