Haier QVM7167RN User Manual

31-7000110 Rev. 1 06-20 GEA
English/Spanish
Installation Instructions
Over the Range Microwave Oven
If you have questions, visit our website at: haierappliances.com.
READ CAREFULLY
KEEP THESE INSTRUCTIONS
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Read and observe all WARNINGS and CAUTIONS shown
throughout these instructions.
IMPORTANT – Observe all governing codes and ordinances.
• Note to Installer – Be sure to leave these instructions for
the consumer’s and local inspector’s use.
• Note to Consumer – Keep these instructions with your
Owner’s Manual for future reference.
• Skill Level – Installation of this appliance requires basic
mechanical and electrical skills.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered
under the Haier Appliances Warranty. See Warranty
information.
• Completion Time – 1 to 3 Hours. New installations require
more time than replacement installations.
Care should be exercised when the appliance is installed or
removed, to reduce the likelihood of damage to the power
supply cord.
If you received a damaged appliance, you should
immediately contact your dealer or builder.
Model Number: QVM7167

Haier QVM7167RN Specifications

General

Brand	Haier
Model	QVM7167RN
Category	Microwave Oven
Language	English

Summary

Safety and Electrical Requirements

Important Safety Instructions

Crucial safety guidelines for qualified electricians and users.

Risk of Electric Shock Warnings

Details hazards and precautions related to electric shock.

Electrical Requirements for Installation

Specifies voltage, frequency, amperage, and circuit requirements.

Tools and Mounting Space Requirements

Mounting Space and Cabinet Clearances

Specifies dimensions and clearances for cabinet installation.

Mounting Plate Placement and Marking

Determining Mounting Plate Location

Marking Mounting Holes with Paper Template

Marking Mounting Holes with Metal Bracket

Installation Types and Ventilation Options

Recirculating (Non-Vented Ductless) Installation

Steps for installing the microwave with non-vented ductless recirculation.

Outside Top Exhaust (Vertical Duct) Installation

Steps for installing the microwave with outside top vertical duct exhaust.

Outside Back Exhaust (Horizontal Duct) Installation

Steps for installing the microwave with outside back horizontal duct exhaust.

Recirculating Installation Steps

Check and Adapt Blower Motor Orientation

Mount the Microwave Oven (Recirculating)

Securely mount the oven to the top cabinet and wall for recirculation.

Outside Top Exhaust Installation Steps

Adapt Blower for Outside Ventilation

Assemble and Install Exhaust Adaptor

Mount the Microwave Oven (Top Exhaust)

Securely mount the oven to the top cabinet and wall for top exhaust.

Connect Ductwork for Top Exhaust

Extend and seal ductwork to connect the exhaust adaptor to the house duct.

Outside Back Exhaust Installation Steps

Prepare Rear Wall for Back Exhaust

Attach Mounting Plate to Wall

Adapt Blower for Outside Back Exhaust

Mount the Microwave Oven (Back Exhaust)