5- Installation
12
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card).
5.9 Electrical connection
Before each connection check if:
▶ power supply, socket and fusing are appropriate to the rating plate.
▶ the power socket is earthed and no multi-plug or extension.
▶ the power plug and socket are t properly.
Connect the plug to a properly installed household socket.
5.8 Waiting time
The maintenance-free lubrication oil is located in the
capsule of the compressor. This oil can get through
the closed pipe system during transport if the appli-
ance is tilted. Before connecting the appliance to the
power supply, wait 24 hours (Fig. 5.8) so that the oil
runs back into the capsule.
To Next Page
Loading...
