4
www.HALCONfurniture.com
CREW
operation
• Remove all items from the table top.
• Disconnect all cords, including power in-feed and table to table cables.
• Disengage table ganging latches and separate tables.
PRIOR TO FOLDING THE TABLE, PLEASE ENSURE THE FOLLOWING:
step 1
Lift the LH side of the table to release the leg. Swing the leg towards the rear of the table.
step 5
Support the leading edge of the table until it is perpendicular to the floor.
step 4
Continue swinging the leg towards the back of the table.
step 3
Lift the RH side of the table to release the leg. Swing the leg towards the rear of the table.
step 2
Continue swinging the leg towards the back of the table.
To Next Page
Loading...