8.3 Playback mode
• Activate Playback operating mode by repeatedly pressing [MODE](6).
appears at the lower-left edge of the screen.
• Use the navigation buttons [◄](9) /[►](5) to select the le you would like to play.
• Press [MENU](8) for moreoptions.
• Use the navigation buttons [◄](9) /[►](5) to navigate through the menu.
• Select the Delete menu item and conrm your selection by pressing [OK](7).
• Youcan choose between Delete selection and Delete all.
• Conrm the subsequent conrmation prompt with OK,orselect Cancel to cancel the operation.
• Press [MENU](8) for moreoptions, to alternatively go to the Lock menu item.
• Select the Lock menu item and conrm your selection by pressing [OK](7).
• Youcan choose between Lock le, Lock all, Unlock le and Unlock all.
• Conrm the subsequent conrmation prompt with OK,orselect Cancel to cancel the operation.
9. Settings
9.1 Video mode settings
• Switch to Video mode as described in section 8.1 Video mode.
• Press [MENU](8) to go to the video settings.
•
is shown at the upper-left edge of the screen.
• Use the navigation buttons [◄](9) /[►](5) to navigate through the menu.
• Conrm your selection by pressing [OK](7).
9.1.1 Resolution
Select the desired resolution (1280X720/1920X1080)ofthe recorded video material.
• Navigate to the Resolution menu item and conrm your selection by pressing [OK](7). Anew
overview window opens.
• Use the navigation buttons [◄](9) /[►](5) to select the desired setting.
• Conrm your selection by pressing [OK](7).
9.1.2 Watermark
With the mode activated, atime and date stamp is added to every video le.
• Navigate to the Watermark menu item and conrm your selection by pressing [OK](7). Anew
overview window opens.
• Use the navigation buttons [◄](9) /[►](5) to select the desired setting.
• Conrm your selection by pressing [OK](7).
9.1.3 Motion detection
With motion detection activated, video recording is automatically started when the camerasenses
vibrations (for example, in the case of an accident).
9
To Next Page
Loading...