Hama POCKET CLOCK User Manual

6
Note – Bluetooth
®
password
Some terminal devices requirea
passwordinorder to connect to another
Bluetooth
®
device.
•Ifyour terminal device requests
apasswordfor connection to the
speaker,enter 0000.
Note
•The speaker always stores the last
eight terminal devices paired.
•The speaker will automatically connect
to the last terminal device paired when
it is switched on the next time.
4.6 Automatic
Bluetooth
®
connection
(after successful pairing)
•Make surethat your
Bluetooth
®
-capable
terminal device is on and Bluetooth
®
is activated.
•Make surethat the speaker is located
within the Bluetooth
®
range of max.
10 metres.
•Switch on the speaker as described in 4.1
Switching on the product .
•After aconnection has been established
automatically,the
Bluetooth
®
mode
indicator (13) stops ashing and is
constantly lit. An acoustic signal conrms
that connection was successful.
Note –Connection impaired
After the speaker and terminal device
have been paired, aconnection
is established automatically.If
the
Bluetooth
®
connection is not
established automatically,check the
following:
•Check the Bluetooth
®
settings of your
terminal device to see whether ‘Pocket
Clock’ is connected. If not, repeat the
steps listed under Bluetooth
®
pairing.
•Check whether your terminal device
and the speaker areless than 10
metres apart. If not, move them closer
together.
•Check whether obstacles areimpairing
the range. If so, move the devices
closer together.

Hama POCKET CLOCK Specifications

General

Brand	Hama
Model	POCKET CLOCK
Category	Speakers
Language	English