G Operating instruction
Controls and Displays
1. light /snooze button
=activating the backlight (approx. 5seconds) /
stopping the alarm for 5minutes
2. p button
= p selection of the date, time, alarm time /
switching between 12 and 24-hour format
3. q button
= q selection of the date, time, alarm time /
language selection /Temperatureunit
4. mode button
=setting the date, time, alarm
5. wave button
6. alarm on/off button
=set/disable the alarm
7. Battery compartment
1. Explanation of Warning Symbols and Notes
W
arning
This symbol is used to indicate safety instructions
or to draw your attention to specichazards
and risks.
N
ote
This symbol is used to indicate additional
information or important notes.
2. Package Contents
•RC45radio-controlled alarm clock
•2xAAA batteries
•These operating instructions
3. Safety Instructions
•The product is intended for private, non-
commercial use only.
•Protect the product from dirt, moistureand
overheating, and only use it in adry environment.
•Donot use the product in areas wherethe use of
electronic devices is not permitted.
•Donot place the product near interference elds,
metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect
the product’sfunctionality.
•Donot drop the product and do not expose it to
any major shocks.
•Donot attempt to service or repair the product
yourself.Leave any and all service work to
qualied experts.
•Donot modify the product in any way.Doing so
voids the warranty.
•Keep the packaging material out of the reach of
children due to the risk of suffocation.
•Dispose of packaging material immediately
according to locally applicable regulations.
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
2