Hama RC 45 - Page 5

4
Display
Searching for the
DCF signal
Flashing display
Active
Constant display
Successful –
signal is being received
No display
Error –
signal search ended
Weak signal reception
N ote –Automatic search
The clock automatically searches for the DCF
signal ve times per day to ensurethat the
time is correct. If the search fails, it ends and is
repeated at the next clock hour.The radio symbol
disappears.
•Ifthe clock repeatedly fails to receive asignal,
press the wave button (5) to manually start the
search for the DCF signal. The radio symbol
starts to ash.
•Press the wave button (5) to cancel the search
procedure.
N ote –Manual search
The manual search takes about 7minutes. If the
search fails, it ends and is repeated at the next
clock hour.The radio symbol disappears.
N ote –Summer time
The clock automatically switches to summer time.
N ote –Time zone
•The time zone is used if the DCF time signal
is received in acountry whose time zone does
not correspond to German time.
•Ifthe time shift is +1 hour,for example, you
need to set the time zone to +1. This will
automatically set the clock forwardone hour.